Jonsered SM 2186 Chainsaw User Manual


 
English 29
MAINTENANCE
WARNING!
The one-man sawmill must be
disconnected from power during
all maintenance work. Always use
personal protective equipment.
!
FIG. 53
FIG. 52
Clutch drum
When replacing the clutch drum on the chain saw, see
the chain saw operators manual.
The clutch drum on the chain sawmill with electric
motor has a setscrew installed in the end of the drive
shaft. The task of the screw is to prevent the clutch
drum from unscrewing in the event the sawmill is
started in the wrong direction. CAUTION! The screw
and its washer must be unscrewed before the clutch
drum can be removed. The clutch drum has left-hand
threads.
The clutch drum is equipped with ring sprockets
(replaceable). The clutch drum has a needle bearing
on the output shaft, which has to be greased regularly
(once a week). CAUTION! Use only high quality
bearing grease.