Filter
Top Products
English – 23
STARTING AND STOPPING
WARNING!
Observe the following before star-
ting the engine:
• The engine must be mounted in
the sawmill before starting.
Otherwise the clutch can come
loose and cause personal injuries.
• Keep people and animals well
away from the risk zone.
!
Starting a cold chain saw engine
(FIG. 38)
A cold engine is started as follows:
1. Read through the operator’s manual for the chain
saw carefully and make sure you understand it
before attempting to start the chain saw.
2. Set the stop button to the start position.
3. Pull out the choke. When the choke is pulled out
the throttle valve is automatically set in the start
throttle position.
4. For other operation, see the chain saw operator’s
manual.
FIG. 38
FIG. 39
Stopping the chain saw engine
(FIG. 39)
The engine is stopped by setting the stop button to the
stop position.