Filter
Top Products
English – 27
WARNING!
Check during sawing that the chain
does not hit the folding stops or
log lock.
WARNING!
The saw carriage must not be
moved backwards while the chain
is in motion. The log could come
loose and cause personal injury.
Starting the Petrol Engine
1. Start the engine. See page 23.
Starting the Electric Motor
1. Start the electric motor. See page 24.
Sawing
2. Move the saw carriage forwards and cut off the
sapwood.
3. Remove the sapwood.
4. Loosen the log, turn it 180°, lower the height
adjuster (B), and secure the log.
5. Set the required cutting height using the height
adjustment crank (11). This determines the width
of the board.
6. Cut off the sapwood on the other side. See p 2
and 3.
USE
!
!
FIG. 47
FIG. 48