Filter
Top Products
PR-Series Operator’s Manual-E/F 17
CONNECT DISCHARGE HOSE TO GUN
CAUTION: Check pressure rating printed on the
hose. Use proper hoses.
1. Retract locking ring (A) of hose quick-connect tting
and insert gun quick-connect male tting.
2. Slide locking ring forward. Tug hose gently to ensure
solid connection.
NOTE: Some hoses are pre-assembled to the gun and can
not be detached.
IMPORTANT: DO NOT attach nozzle wand to gun handle
until water system is primed.
PIC74•102299R0
PIC75•102299R0
Preparing the Washer
A
INSTALLING NOZZLE
CAUTION: To avoid injury from escaping uids
under pressure, relieve the pressure in the
system by stopping the washer and depressing
gun trigger. Lock trigger before changing or
adjusting nozzle.
Be sure nozzle is tightly attached before operating
to help prevent nozzle release.
1. Retract locking ring (A) of quick-connect tting and
insert male quick-connect tting of nozzle (B).
2. Push ring forward and lock nozzle in place. Be sure
nozzle is fastened to wand.
FINAL CHECKLIST
1. Check engine oil and fuel.
2. Open water supply completely.
3. Check all hose connections.
4. Check hoses for kinks.
PIC81•102299R0
A
B