Filter
Top Products
Rockshaft and 3-Point Hitch
PY80265,05GO848 –19–04JUL06–1/1
Rockshaft Control Levers
PY4960 –UN–22APR05
A—Rockshaft Position Control Lever
B—Rockshaft Draft Control Lever
The rockshaft position is controlled by two levers, the
rockshaft position control lever (A) and the rockshaft draft
control lever (B)
The rockshaft position control lever (A) raises the hitch
when pulled rearward, and lowers the hitch when moved
forward. See Using Rockshaft Position Control in this
section for more information.
The rockshaft draft control lever (B) controls hitch position
relative to draft loads. See Using Draft Control in this
section for more information.
PY80265,05GO849 –19–10SEP05–1/1
Setting Position Control Lever Stop
PY4961 –UN–22APR05
A—Lever Stop
NOTE: Position control lever stop is used when operating
depth or height needs to be repeated.
1. Operate implement for a few minutes to determine
proper depth or height.
2. Loosen lever stop (A), and slide against position
control lever. Lock stop in position by turning in a
clockwise direction. Rockshaft will now lower to same
position each time control lever is pushed forward to
the stop.
55-2
022607
PN=55