Filter
Top Products
CODE
ATTACHMENT
IDENTIFIER DESCRIPTION
SUGGESTED
LIST PRICE
USD ($)
RADIO ...Continued...
REMOTE SELECTIVE CONTROL VALVES
3331 Three Remote Selective Control Valves with Push/Pull Breakaway Couplers
and High Pressure Relief Levers
-1,875.00
3341 Four Remote Selective Control Valves with Push/Pull Breakaway Couplers
and High Pressure Relief Levers
In Base Price
3351 Five Remote Selective Control Valves with Push/Pull Breakaway Couplers
and High Pressure Relief Levers
1,876.00
3361 Six Remote Selective Control Valves with Push/Pull Breakaway Couplers
and High Pressure Relief Levers
Includes Auxiliary CommandArm Mounted SCV Controls.
Only available on Model Year 2012 Tractors.
3,753.00
POWER TAKE OFF
3810 45 mm (1-3/4 In.) 1000 rpm PTO (20 Spline) In Base Price
REAR HITCH
Advertised Hitch Lift Capacity is the amount of force that is sustained through the entire range
of lift, measured at 610 mm behind the hitch point. This is measured with the rear hitch
centerlink connected to the upper hole. See Operators Manual for more information.
Maximum Lift Capacity is noted as well. This is the maximum force achieved during lift,
directly at the hitch point.
4000 Less 3-Point Hitch
Requires Code 3331 Three Remote Selective Control Valves.
If 4 and/or 5 remote cylinder control valves are required, order field installed kit RE301321
(4th Remote Cylinder Control Valve) and/or RE301501 (5th Remote Cylinder Control Valve).
Not compatible with Code 841H Front Hitch.
-5,922.00
4032 8,482 kg (18,700 Lbs.) Lift Capacity Hitch (Cat 4N/3) Hitch with
Sway Blocks and Quick Coupler
11,933 kg (26,307 Lbs.) Maximum Lift Capacity.
Requires Group 48 Rear Tires.
Requires 120mm Diameter Rear Axle.
In Base Price
4046 6396 kg (14,100 Lbs.) Lift Capacity Hitch (Cat 4N/3) Hitch with Sway Blocks
and Quick Coupler
8,984 kg (19,807 Lbs.) Maximum Lift Capacity.
Requires Group 48 Rear Tires.
Requires 120mm Diameter Rear Axle.
Only available on Model Year 2012 Tractors.
-1,211.00
DRAWBAR AND TRAILER HITCH
4321 Cat. 4 Adjustable Swinging Drawbar with 50 mm (2 In.) Pin
2,245 kg (4,950 Lb.) Maximum Vertical Load.
Use of 540 RPM PTO Shaft is not recommended due to interference during turns.
In Base Price
4322 Cat. 4 Adjustable Swinging Drawbar with 50 mm (2 In.) Pin with
Heavy Duty Support
4990 kg (11,000 Lb.) Maximum Vertical Load.
Use of 540 RPM PTO Shaft is not recommended due to interference during turns.
556.00
AGRICULTURAL PRODUCTS
JOHN DEERE TRACTORS
8360R Tractor
Continued
16 May 2012 US & Canada
2-Tractors-06900- 9