Filter
Top Products
CODE
ATTACHMENT
IDENTIFIER DESCRIPTION
SUGGESTED
LIST PRICE
USD ($)
ATTACHMENTS FOR FIELD CONVERSION ...Continued...
RE524692 Engine Block Heater (220V) See Parts
RE321571 Fuel/Water Separator Kit, Severe Duty
In addition to water separator in base equipment.
627.00
Fenders:
RE260608 Fenders, Deluxe Pivoting Front for 1300 Series MFWD - 18.7 In. (480 mm) Wide
Recommended use with 12.4 In. (290 mm) to 16.9 In. (420 mm) tire widths.
Compatible with 1300 Series MFWD front axle only.
1,368.00
RE260609 Fenders, Deluxe Pivoting Front for 1300 Series MFWD - 24.4 In. (620 mm) Wide
Recommended use with 18.4 In. (480 mm) to 23.6 In. (600 mm) tire widths.
Compatible with 1300 Series MFWD front axle only.
1,603.00
RE308214 Fenders, Deluxe Pivoting Front for 1500 Series MFWD - 18.7 In. (480 mm) Wide
Recommended use with 12.4 In. (290 mm) to 16.9 In. (420 mm) tire widths.
Compatible with 1500 Series MFWD front axle only.
1,368.00
RE308215 Fenders, Deluxe Pivoting Front for 1500 Series MFWD - 24.4 In. (620 mm) Wide
Recommended use with 18.4 In. (480 mm) to 23.6 In. (600 mm) tire widths.
Compatible with 1500 Series MFWD front axle only.
1,603.00
RE236667 Fenders, Deluxe Pivoting Front for Independent Link Suspension -
18.7 In. (480 mm) Wide
Also order 2 pieces of R186578.
Recommended use with 12.4 In. (290 mm) to 16.9 In. (420 mm) tire widths.
1,368.00
RE236670 Fenders, Deluxe Pivoting Front for Independent Link Suspension -
24.4 In. (620 mm) Wide
Also order 2 pieces of R186578.
Recommended for use with 18.4 In. (480 mm) to 23.6 In. (600 mm) tire widths.
Not for use with front dual tire combinations.
1,603.00
RE324406 Fenders, Extra Width Rear Fender Extensions
For use with 800 mm wide rear tires.
Requires Full Coverage Rear Fenders (RE318606) for installation.
276.00
RE318606 Fenders, Full Coverage Rear 2.55 meter (100 In. Width)
Included in Code 9083.
500.00
Hitch and Drawbar:
R177682 Center Link Bracket
Retains the center link when not in use.
See Parts
AR211154 Drawbar Heavy Duty Support for use with Cat. 4 Drawbar
(11,000 Lb. Vertical Load Capacity)
Requires Cat. 4 Drawbar.
Increases vertical load capacity to 11,000 Lb. (4990 kg.).
Cat. 4 Drawbar is not compatible with PTO Codes 2418 or 2420 or with field installed 1-3/8
540 rpm PTO.
809.00
RE268625 Drawbar, Ball-type 80 mm Cat. 4
Ball-type drawbar for use when using the DN 345 - Drawn Dry Box Spreader. No other
implements are approved for this drawbar.
3,263.00
AGRICULTURAL PRODUCTS
JOHN DEERE TRACTORS
8335R Tractor
Continued
16 May 2012 US & Canada
2-Tractors-06800- 30