Filter
Top Products
CODE
ATTACHMENT
IDENTIFIER DESCRIPTION
SUGGESTED
LIST PRICE
USD ($)
POWER TAKE OFF ...Continued...
3821 45 mm (1-3/4 In.) 1000 rpm (20 Spline) with 35 mm (1-3/8 In.)
540 (6 Spline) / 1000 (21 Spline) rpm PTO
35 mm ( 1-3/8 In.) 540 rpm PTO portion of this option is not compatible with Cat. 4 Drawbar.
2,448.00
REAR HITCH
Advertised Hitch Lift Capacity is the amount of force that is sustained through the entire range
of lift, measured at 610 mm behind the hitch point. This is measured with the rear hitch
centerlink connected to the upper hole. See Operators Manual for more information.
Maximum Lift Capacity is noted as well. This is the maximum force achieved during lift,
directly at the hitch point.
4000 Less 3-Point Hitch
Requires Code 3331 Three Remote Selective Control Valves.
If 4 and/or 5 remote cylinder control valves are required, order field installed kit RE301321
(4th Remote Cylinder Control Valve) and/or RE301501 (5th Remote Cylinder Control Valve).
Not compatible with Code 841H Front Hitch.
-5,922.00
4033 6169 kg (13,600 Lbs.) Capacity 3-Point Hitch (Cat 3/3N) with
Sway Blocks and Quick Coupler
8,679 kg (19,134 Lbs.)Maximum Lift Capacity.
In Base Price
4034 7983 kg (17,600 Lbs.) Capacity Hitch (Cat 3/3N) with Sway Blocks and Quick Coupler
11,214 kg (24,724 lb)Maximum Lift Capacity.
Requires 120 mm Diameter Rear Axle.
1,211.00
4032 8,482 kg (18,700 Lbs.) Lift Capacity Hitch (Cat 4N/3) Hitch with
Sway Blocks and Quick Coupler
11,933 kg (26,307 Lbs.) Maximum Lift Capacity.
Requires Group 48 Rear Tires.
Requires 120mm Diameter Rear Axle.
2,545.00
DRAWBAR AND TRAILER HITCH
4320 Cat. 3 Adjustable Swinging Drawbar with 38 mm (1.5 In.) Pin
1,837 kg (4,050 lb.) - 2,700 kg (6,000 lb.) Maximum Vertical Load dependent on Drawbar
position.
In Base Price
4321 Cat. 4 Adjustable Swinging Drawbar with 50 mm (2 In.) Pin
2,245 kg (4,950 Lb.) Maximum Vertical Load.
Use of 540 RPM PTO Shaft is not recommended due to interference during turns.
261.00
4322 Cat. 4 Adjustable Swinging Drawbar with 50 mm (2 In.) Pin with
Heavy Duty Support
4990 kg (11,000 Lb.) Maximum Vertical Load.
Use of 540 RPM PTO Shaft is not recommended due to interference during turns.
817.00
HYDRAULIC PUMP
3240 166.5 lpm (44 gpm) 63 cc Hydraulic Pump Displacement
Not compatible with Codes 6042 1500 MFWD, 6060 ILS, or 6061 ILS with brakes.
In Base Price
3260 227.1 lpm (60 gpm) 85 cc Hydraulic Pump Displacement 1,266.00
REAR AXLES
AGRICULTURAL PRODUCTS
JOHN DEERE TRACTORS
8285R Tractor
Continued
16 May 2012 US & Canada
2-Tractors-06600- 17