Filter
Top Products
CODE
ATTACHMENT
IDENTIFIER DESCRIPTION
SUGGESTED
LIST PRICE
USD ($)
POWER TAKE OFF ...Continued...
540 (6 Spline) / 1000 (21 Spline) rpm PTO
35 mm ( 1-3/8 In.) 540 rpm PTO portion of this option is not compatible with Cat. 4 Drawbar.
REAR HITCH
Advertised Hitch Lift Capacity is the amount of force that is sustained through the entire range
of lift, measured at 610 mm behind the hitch point. This is measured with the rear hitch
centerlink connected to the upper hole. See Operators Manual for more information.
Maximum Lift Capacity is noted as well. This is the maximum force achieved during lift,
directly at the hitch point.
4000 Less 3-Point Hitch
Requires Code 3331 Three Remote Selective Control Valves.
If 4 and/or 5 remote cylinder control valves are required, order field installed kit RE301321
(4th Remote Cylinder Control Valve) and/or RE301501 (5th Remote Cylinder Control Valve).
Not compatible with Code 841H Front Hitch.
-5,922.00
4032 8,482 kg (18,700 Lbs.) Lift Capacity Hitch (Cat 4N/3) Hitch with
Sway Blocks and Quick Coupler
11,933 kg (26,307 Lbs.) Maximum Lift Capacity.
Requires Group 48 Rear Tires.
Requires 120mm Diameter Rear Axle.
In Base Price
4046 6396 kg (14,100 Lbs.) Lift Capacity Hitch (Cat 4N/3) Hitch with Sway Blocks
and Quick Coupler
8,984 kg (19,807 Lbs.) Maximum Lift Capacity.
Requires Group 48 Rear Tires.
Requires 120mm Diameter Rear Axle.
Only available on Model Year 2012 Tractors.
-1,211.00
DRAWBAR AND TRAILER HITCH
4321 Cat. 4 Adjustable Swinging Drawbar with 50 mm (2 In.) Pin
2,245 kg (4,950 Lb.) Maximum Vertical Load.
Use of 540 RPM PTO Shaft is not recommended due to interference during turns.
In Base Price
4322 Cat. 4 Adjustable Swinging Drawbar with 50 mm (2 In.) Pin with
Heavy Duty Support
4990 kg (11,000 Lb.) Maximum Vertical Load.
Use of 540 RPM PTO Shaft is not recommended due to interference during turns.
556.00
HYDRAULIC PUMP
3260 227.1 lpm (60 gpm) 85 cc Hydraulic Pump Displacement In Base Price
REAR AXLES
5042 120 mm (4.72 In.) Diameter x 3010 mm (118.5 In.) Length with
Double Taper Wheel Hubs
In Base Price
5043 120 mm (4.72 In.) Diameter x 2438 mm (96 In.) Length with
Double Taper Wheel Hubs
-1,015.00
REAR WHEELS AND TIRES (CAST MAIN AND STEEL DUAL OR
TRIPLE UNLESS NOTED)
For complete tire and wheel information, refer to the Agricultural Sales Manual or individual
tire manufacturer's handbook.
AGRICULTURAL PRODUCTS
JOHN DEERE TRACTORS
8335R Tractor
Continued
16 May 2012 US & Canada
2-Tractors-06800- 17