Filter
Top Products
Instrument Panel - Elect. Cont. Earlier Engines
DPSG,OUOD007,2842 –19–27JUL06–1/1
Changing Units of Measure (English or Metric)
RG10018 –19–28OCT99
Changing Units Of Measure
The diagnostic gauge can display engine data in either
English or Metric units. To toggle between these, the
Units Sub-Menu
, must be selected.
To select the
Units Sub-Menu
, press the UP or DOWN
switch until the top line of the display reads “Units”.
Then press BOTH the UP and DOWN switches at the
same time to select the
Units Sub-Menu
. The above
diagram shows the steps for selecting the desired units
of measure. Two options are available:
1. Press both the switches to retain the current units
designation.
2. Press either UP or DOWN switch to toggle the units
selection, then press both switches to select the
desired unit of measure.
16-12
080706
PN=58