Filter
Top Products
Engine Operation - Except 4.5L “270” Engines
OURGP11,0000076 –19–27JUL06–1/3
Starting the Engine
TS220 –UN–23AUG88
Use Proper Ventilation
The following instructions apply to the optional controls
and instruments available through the John Deere Parts
Distribution Network. The controls and instruments for
your engine may be different from those shown here;
always follow manufacturer’s instructions.
CAUTION: Before starting engine in a confined
building, install proper outlet exhaust
ventilation equipment. Always use safety
approved fuel storage and piping.
NOTE: If temperature is below 0
°
C (32
°
F), it may be
necessary to use cold weather starting aids (See
COLD WEATHER OPERATION, later in this
section).
1. Perform all prestarting checks outlined in Lubrication &
Maintenance/Daily Section later in this manual.
2. Open the fuel supply shut-off valve, if equipped.
3. Disengage clutch (if equipped) controlling any engine
drivelines.
Continued on next page
19-4
080706
PN=102