Filter
Top Products
Instrument Panel - Elect. Cont. Earlier Engines
OURGP11,000027A –19–07AUG06–7/7
The cancel/resume function is intended for applications
like agricultural tractors and sprayers that turn around at
the end of each row in a field. This allows the operator to
use the throttle and/or brake to turn the vehicle around.
When ready to resume field operations, the operator
brings the engine speed above 1300 rpm and activates
the cancel/resume function again to resume cruise speed.
An internal timer gives the operator one minute to
complete the turnaround maneuver.
The cruise control has the normal functions of:
• Cruise control power “ON” or “OFF”.
• “Set” or “bump up” engine speed.
• “Resume” or “bump down” engine speed.
• Use vehicle brake or clutch pedal to disengage cruise
control.
The “bump up” and “bump down” speed controls allow the
operator to change the set speed. Small engine speed
changes can be made by “bumping” the control switch.
Holding the “bump up” or “bump down” switch will result in
greater engine rpm changes until the engine reaches
either full speed or idle. The cruise control cannot operate
beyond the normal min/max engine speeds.
16-7
080706
PN=53