Filter
Top Products
Page 37
To remove pillows:
1. Grasp center pillow insert (A) with
finger tips and gently pry outward from
pillow base (C).
2. Use a standard screwdriver to loosen
and remove mounting bolts (B) from
pillow base.
3. Assemble in reverse order after
cleaning. DO NOT overtighten
pillow mounting bolts!
12.5 Maintaining the Cover
Using the Jacuzzi Premium insulating spa cover anytime the spa is not in use will
significantly reduce your operating costs, heat-up time and maintenance require-
ments. To prolong the life of the cover, handle it with care and clean it regularly
using mild soap and water. Periodic treatments with a special conditioner devel-
oped for Jacuzzi Premium spa covers will help protect against deterioration caused
by UV rays from the sun. Never allow anyone to stand or sit on the cover, and avoid
dragging it across rough surfaces.
12.6 Maintaining The Wood Cabinet
With time and exposure to the elements, the wood on your spa will tend to lose its
new appearance. Protecting or reviving the wood surfaces is a fairly simple process.
Light sanding with fine-grit sandpaper will help smooth any roughness and regular
applications of a penetrating wood preservative will enhance and protect the rich-
ness of the wood. A specially formulated wood stain available from your Jacuzzi
Premium dealer is ideal for this.
NOTE: Do not apply varnish, shellac or other surface sealants to the
wood. These tend to react with the chemicals in the wood and the UV
rays of the sun, causing yellowing, flaking and peeling.
12.7 Maintaining The Optional Synthetic Cabinet
Your new spa’s synthetic wood cabinet requires little or no maintenance of
any kind. To clean, simply wipe cabinet with a clean towel and mild soap
solution.
CAUTION: Never spray cabinet with a garden hose for any reason
since this action may induce an electrical short in the spa’s
electrical equipment.