Filter
Top Products
Page 32
The factory default start time is 12:00AM (Midnight). The default duration
is 24 hours. To make adjustments, press the sensor labeled CYCLE fiv
e
times to enter the circulation pump programming mode. The LCD screen
will display ADJUST Circ. At this time the system is ready to accept your
changes.
•Press the SELECT sensor once. The previously programmed start time
appears on the LCD display.
•Press WARMER ( + ) or COOLER ( - ) sensors to adjust the start time
in 30-minute increments.
•Press the SELECT sensor to program duration.
•Press WARMER ( + ) or COOLER ( - ) sensors to program the duration
time in 2 hour increments.
•Press DISPLAY to make the circulation pump programming characters
disappear from the screen and the main display return to showing the
water temperature. If no sensor is pressed within 30 seconds, the
screen will automatically return to the normal water temperature display
Note: In standard skimming/heating mode only, the circulation pump auto-
matically activates if the spa requires heat regardless of the programmed
start time and duration.
11 .5 Locking Skimming/Heating Cycles
You may keep the skimming/heating cycle programs from being
inadvertently altered by electronically “locking” them. To accomplish
this, simply press CYCLE then, within 30 seconds, press DISPLAY,
MODE and WARMER ( + ), within five seconds each.
A padlock symbol will appear on the screen. In this state, the status of the
cycle programming may be checked, but may not be altered. To unlock the
skimming/heating cycle programming to make changes, simply press
DISPLAY, MODE and COOLER ( - ) within five seconds each.
11 .6 Panel Lock
To help prevent unauthorized use of your spa, the controls incorporate a
unique panel locking system which disables the controls on the panel.
To Lock The Panel: Press the DISPLAY, MODE, and WARMER
( + ) sensor pads, in order, within five seconds. A padlock symbol
will appear on the LCD screen. With the panel locked, none of the
components can be turned on and the only settings that can be
adjusted are the standard/economy operating mode and changing the time
LOCKED
LOCKED