Filter
Top Products
Page 93
J-400
1.
When you rst use the remote, it will
need to be bonded to the spa for opera-
tional use. To bond the remote:
Press button D and the Down but-•
ton, at the same time, for 2 seconds
(Figure A).
The programming instructions will appear on the •
control panel LCD Display (Figure A).
You will need to press the keys below on the • remote
unit, not the control panel on the spa, in the follow-
ing sequence (Figure B):
1. Return, up
2. Return, up
3. Return, up
4. Select
After you press the Select button, •
Figure C will appear on the control
panel LCD Display.
Finally, Figure D will appear once the •
bonding has nished. To clear the
LCD display, press any key on the
control panel.
2. Main Menu
When any key is pressed and the remote
awakes it will display the icons that are
selectable. You can use the Navigational
Keypad (up, down, left or right) to navigate through the screens
and make selections. By moving through the icons, they will blink to let
you know that if you hit the Select button you will activate that component
or aspects of it.
1
2
1
USB
AUX
1
2
2
iPod
1
2
1
1
2
2
Remote display for spas
with the stereo option
Remote display for spas
without the stereo option
REMOTE CONTROL
CONNECTION
Press the keys below
Return, up
Return, up
Return, up
Select
DOWN
D
Figure A
REMOTE CONTROL
CONNECTION
Figure C
REMOTE CONTROL
CONNECTION
Enjoy
Figure D
1
1
USB
AUX
1
2
iPod
22
RETURN
UP
SELECT
Figure B