Filter
Top Products
18
Use ► or ◄ button to move the cursor, and ▼ or ▲ button to change the number. Press
ENTER to finish land object coordinates setting.
Press BACK to back to main menu.
5.3. Sync to Target
This operation will match the telescope's current coordinates to target’s ones. After slew to an
object, move the cursor to “Sync to Target” and press ENTER. Follow the screen to do the sync.
Using this function can improve the GOTO accuracy in nearby sky. Multiple syncs can be
performed if needed.
“Sync to Target” will only work after “Select and slew” was performed. You may need using
SPEED key to change the slewing speed to make the centering procedure easier. A default
slew speed is 2X.
5.4. Set Up Controller
5.4.1. Set Display Info
• Adjust LCD Contrast
Use arrow keys to adjust LCD display contrast. Press ENTER.
• LCD Back Light.
Use arrow keys to adjust LCD screen back light intensity. Press ENTER.
• Keypad Backlight.
Use arrow keys to adjust keypad backlight. Press ENTER.
LCD Back Light
Adjust LCD Contrast
Enter Alt. Azi.
Alt: 13º 0.0’
Azi: 25º58.8’