Filter
Top Products
English---14
545196786 Rev. 2 4/30/09
FUEL HANDLING
S Always start by flling half the amount of the
petrol to be used . Then add the entire
amount of oil. Mix (sh ake) the fuel mixt ure.
Add the remaining amount of petrol.
S Mix (shake) the fuel mixture thoroughly
before filling the machine’s fuel tank.
S Do not mix more than one month’s sup-
ply of fuel at a time.
S If the machine is not use d for some time,
the fuel tank shou ld be emptied and
cleaned.
W ARNING: The catalytic con-
verter muffler gets very hot during
and after use. This also applies
during idling. Be aware of the fire
hazard, especially when working
near flammable substances and/or
vapors.
Fuelling
WARNING: Taking the following
precautions, will lessen the risk of
fire:
Do not smoke or place hot objects
near fuel.
Always shut off the engi ne before
refueling.
Always stop the engine and let it
cool for a few minutes before refu-
elling.
When refueling, open the fuel cap
slowly so that any excess pressure
is released gently .
Tighten the fuel cap carefully after
refueling.
Always move the machine away
from the refueling area before
starting.
Min. 3 m
M
i
x
i
ng
S Always mix the petrol and oil in a clean
container intended for fuel.
S Clean the area around the fuel cap.
Contamination in the tank can cause
operating problems.
S Ensur e that the fuel is well mixed by shak-
ing the con tainer befor e filling the tank.