Filter
Top Products
5
Place the master card on top of any expander cards that are under
the master card. Feed the 2x25 cables that are plugged into the
master card through the cable access holes of the expander cards.
Plug the 2x25 cables into J9 and J10 of the expander cards.
6
Feed the free end of the 2x10 cables of the expander cards through
the access holes to the master card. Plug the 2x10 cables into J4
(bottom-most expander in a five-card configuration) and J5
(expander that is next to the master card) on the master card.
Installation
To configure a multi-card module
14–5