HP (Hewlett-Packard) HP 16554A Weather Radio User Manual


 
Rescale
The Rescale field is used to scale the sampled states based on the position of
the Y1, Y2, X1, and X2 axis markers. To zoom in on a section of the displayed
chart data, position the markers around the area of interest. When the
Rescale field is selected, the pop-up menu allows you to choose rescaling
between the X-axis markers, the Y-axis markers, between X- and Y-axis
markers, Full Scale, or Cancel.
Between X axis markers
This selection will rescale data on the
horizontal X axis based on the positions or settings of X1 and X2. At the
end of the rescaling operation, the X1 marker will reside at the far left
side of the display screen and the X2 marker will reside at the far right
side of the display.
Between Y axis markers
This selection will rescale data on the
vertical Y axis based on Y1 and Y2 settings. At the end of the rescaling
operation, the Y1 marker will be positioned at the far top of the display
screen and the Y2 marker will be positioned at the far bottom of the
display.
Between X&Y axis markers
This selection will execute both X and Y
markers operations as discussed above, resulting in the rescaling of both
the horizontal and vertical axes.
Rescale Field
Rescale field
The Chart Menu
Rescale
8–13