Filter
Top Products
Page 13
August 20, 2008
BODEGA BAY WOOD INSERT
R
435-1320B
1. Remove contents from box being careful not to scratch
or damage trim pieces.
2. Lay the panel set face down on protective covering to
prevent scratching the painted surface.
3. Secure panel set together with screws provided. See
Figure 13A
4. To assemble the trim, attach the 2 side trim pieces
to the top trim at each corner using the “L” bracket
included in fasteners package. See Figure 13B
5. Slide panel and trim as 1 piece over top of the insert
and into position.
6. Secure panel set to insert. See Figure 13A.
Included in Panel Kit: (2) side panels, left and right; (1) panel
top; (2) trim sides, left and right; (1) trim top (1) fastener package.
Tools Needed: Powered Phillips head Screw Driver
STANDARD: 30-1/2” h x 44-5/8”w
LARGE: 34”h x 50-1/2”w
PANEL and GOLD or NICKEL TRIM SET
Tab with screw
hole to secure
panel to insert
Screw side
panels to top
panel
View of "L" Bracket
installed
Figure 13A
Figure 13C
Figure 13B
DOOR HANDLE ASSEMBLY
Door Latch Arm
5/16 Nut 1/4-20
Washer
Washer,
5/16 x 1/4
Fiber
Handle
Door
Handle
SP-BB3044-GD Panel & Trim Set, Std, Gold
SP-BB3044-NL Panel & Trim Set, Std, Nickel
SP-BB3450-GD Panel & Trim Set, Large, Gold
SP-BB3450-NL Panel & Trim, Set, Large, Nickel
DOOR LATCH ADJUSTMENT
Adjustment Bolts
Securing
Screw
It is important the door gasket has a proper seal. As the
gasket compresses or “seats” during use, it may become
necessary to adjust or tighten the door latch.
1. Loosen securing screw (do not remove).
2. Turn adjustment bolts as need for adjustment (in or
out) using 7/16” end wrench.
3. Tighten securing screw to hold adjusted position in
place.
Figure 13D