Filter
Top Products
SKU 95014 For technical questions, please call 1-800-444-3353 PAGE 4
15. Replacement parts and accessories. This product is to be repaired and
serviced only by a qualified technician. When this product is serviced, only
identical replacement parts should be used. Use of any other parts will void the
warranty. Only use accessories intended for use with this tool. Approved
accessories are available from Harbor Freight Tools.
16. Do not operate this product if under the influence of alcohol or drugs. Read
warning labels if taking prescription medicine to determine if your judgement or
reflexes are impaired while taking drugs. If there is any doubt, do not operate
the tool.
17. Maintenance. The maintenance outlined in the “Maintenance” section should be
performed regularly. For your safety, this product should be serviced or repaired
regularly only by a qualified technician.
18. Compressed air only. Use clean, dry, regulated, compressed air at 65 to 125
PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled
gas as a power source for this product.
19. Transport the Pressurized Abrasive Blaster safely. Always disconnect air
supply when moving the tool. Pull the tool by the handle to avoid tipping.
20. Avoid working alone. If an accident happens, an assistant can bring help.
21. Maintain labels and nameplates on the Pressurized Abrasive Blaster.
These carry important information. If unreadable or missing, contact Harbor
Freight Tools for a replacement.
22. Maintain a firm grip on the Blast Gun when in use.
23. Never point the Blast Gun toward yourself, other people, or animals. Keep
all people and animals safely away from the work area.
24. Maintain a safe distance away from the object being sandblasted. Whenever
possible, sandblast the object at a 45 degree angle to minimize the possibility of
grit, dirt, and debris ricocheting directly backward toward your face and body.
25. Industrial applications must follow OSHA requirements.
26. Whenever possible, perform a sandblasting test on a small area of the
object to be sandblasted. If necessary, adjust the distance to the object and/or
change the Nozzle of the Blast Gun for more effective results.
27. Make sure to read and understand all safety warnings and precautions as