Filter
Top Products
SKU 93889 For technical questions, please call 1-800-444-3353 PAGE 8
To Attach The Wheels:
1. Align the two mounting holes in each of the two Wheel Brackets (20) with the two
threaded
mounting holes in each of the two Shaft Supporting Bars at the bottom
of the Tank Assembly (3). Then, use four Screws (16) to secure the Wheel
Brackets to the Shaft Supporting Bars. (See Figure D.)
2. Insert the Steel Axle (23) through the bottom hole of each of the two Wheel
Brackets (20). Place a Flat Washer (21) onto each end of the Steel Axle. Insert
a Wheel (22) onto each end of the Steel Axle. Place another Flat Washer (21)
onto each end of the Steel Axle. Then secure the Wheels to the Steel Axle,
using one Cotter Pin (24) for each Wheel. (See Figure D.)
STEEL AXLE
(23)
WHEEL BRACKET
(20)
COTTER PIN
(24)
FLAT WASHER
(21)
SCREW
(16)
SHAFT SUPPORTING BAR
TANK ASSEMBLY
(3)
WHEEL
(22)
FIGURE D
To Attach The Material Hose:
1. Insert two Hose Clamps (26) onto the Material Hose (25). Insert one end of the
Material Hose onto the Media Manifold (19). Insert the other end of the Hose
onto the Barb Fitting (44) of the Sandblasting Gun. Then secure the Hose to the
Media Manifold and Sandblasting Gun, using the two Hose Clamps.
(See Figure E.)
HOSE CLAMP
(26)
MEDIA MANIFOLD
(19)
HOSE CLAMP
(26)
SANDBLASTING GUN
MATERIAL HOSE
(25)
FIGURE E