Filter
Top Products
SKU 93889 For technical questions, please call 1-800-444-3353 PAGE 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep
your invoice with this manual. Write the invoice number on the inside of the front cover.
Keep this manual and invoice in a safe and dry place for future reference.
SAFETY WARNINGS AND PRECAUTIONS
1. Do not operate the Pressure Blasting System if the Control Lever does not
turn the tool on or off. Any tool that cannot be controlled with its Control Lever
is dangerous and must be replaced.
UNPACKING
When unpacking, check to make sure that all the parts and accessories listed on page 15
are included, and the product is intact and undamaged. If any parts are missing or broken,
please call Harbor Freight Tools at the number shown on the cover of this manual as soon
as possible.
2. Keep work area clean. Cluttered areas invite accidents.
3. WARNING! Do not operate pneumatic equipment in explosive
atmospheres, such as in the presence of flammable liquids, gases, or dust.
Pneumatic equipment can create sparks which may ignite flammables.
Item Description
Media Tank Capacity 90 Pounds
Maximum Tank Pressure 125 PSI
Pressure Gauge Indicator 0 ~ 150 PSI
Required Compressed Air
System (Not Included)
2 HP Compressor With 3/8” Diameter Air Hose
Recommended Media Type Glass Bead / Silicon Carbide
Alumina / Walnut Shell / Brass Bead
Recommended Use Use with 80, 100, or 120 Grit Media, at 60 PSI, with 3/32”
Nozzle for best results (Run Time: 45 minutes with 90 Lbs. Media)
Water Trap Type Push Button to Drain
Accessories 3/32” Nozzle (Qty. 1) / 1/8” Nozzle (Qty. 1)
8 Ft. x 1/2” I.D. Hose (Qty. 1) / Blast Hood (Qty. 1)
Sandblaster Gun (Qty. 1) / Pipe Thread Seal Tape (Qty. 1)
Net Weight 29.70 Pounds