Filter
Top Products
SKU 93889 For technical questions, please call 1-800-444-3353 PAGE 6
For best service, you should incorporate an oiler, regulator, and in-line filter, as
shown in the diagram below. Hoses, couplers, oilers, regulators, and filters are all
available at Harbor Freight Tools. NOTE: If an automatic oiler is not used, put 3-5
drops of pneumatic Tool Oil (not included) in the tool’s quick connector before
each use. (See Figure A.)
6. Use respiratory protection when source controls cannot keep silica exposures
below the recommended levels.
7. Provide periodic medical examinations for all workers who may be exposed to
crystalline silica.
8. Post signs to warn workers about the hazard and to inform them about required
protective equipment.
9. Provide workers with training that includes information about health effects,
work practices, and protective equipment for crystalline silica.
10.Report all cases of silicosis to State health departments and to OSHA or the
Mine Safety and Health Administration (MSHA).
31. WARNING! The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or other reproductive
harm). (California Health & Safety code § 25249.5,
et seq.
)
32. WARNING! The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and situations that may
occur. It must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
33. Always connect this unit securely to an electrically grounded object (such as a
water pipe or metal rod driven into the earth). If this unit is not grounded, a spark
could potentially ignite a cloud of flammable dust, causing fire/explosion.
SAVE THESE INSTRUCTIONS
REGULATOR
OILER
FILTER
TO
PRESSURE
BLASTING
SYSTEM
FIGURE A
ASSEMBLY INSTRUCTIONS