Filter
Top Products
GB - 16
NOTE: It may be necessary to adjust cutting height in
steps to keep deck from binding.
LAWN STRIPER ADJUSTMENT (44" and
48" decks; optional on 32" and 36" decks)
The striper drags behind the deck and shapes grass as
you mow.
Adjust the striper to match cutting height.
Short grass (deck low): mount from bottom holes.
Tall grass (deck high): mount from top holes.
PARKING
988100, 101, 102, 103, 104, 110, 112
1. Shut off the unit. See Shut Off on page 13 and
"To stop mowing."
2. Remove the key.
3. Lock both steering lever latches in neutral to
engage the brakes.
4. Chock or block the wheels if parked on a slope.
988114, 115, 118, 119, 313
1. Shut off the unit. See Shut Off on page 13 and
"To stop mowing."
2. Remove the key.
3. Lock pivot bar against control levers.
4. Chock or block the wheels if parked on a slope.
TO PUSH UNIT BY HAND
988100, 101, 102, 103, 104, 110, 112
To move the unit without the engine running:
1. Put the shift lever in neutral.
2. Hold steering levers in neutral and disengage
latches. Release steering levers. The brake is
disengaged when the steering levers are
released.
3. Push unit to desired location.
IMPORTANT: Towing the unit will damage
transmission.
988114, 115, 118, 119, 313
To move the unit without the engine running:
1. Put the shift lever in neutral.
2. Push the control levers all the way forward to
release the brakes.
3. Push unit to desired location.
IMPORTANT: Towing the unit will damage the
transmission.
TO TRANSPORT UNIT
ALWAYS shut off engine, remove key and drain fuel
when transporting unit on a truck or trailer. Use extra
care when loading or unloading unit.
Lock both steering lever latches in neutral to engage
the brakes, or lock pivot bar against control levers.
Secure unit chassis to transport vehicle. NEVER
secure from rods or linkages that could be damaged.
DO NOT transport machine while engine is running.
Inches
(mm)
1
1.5
2
3
4
2.5
3.5
(25)
(38)
(51)
(76)
(102)
(64)
(90)
Figure 6
OG1385
Floating Deck Cutting Heights