Filter
Top Products
GB - 11
Steering Levers (988100, 101, 102, 103, 104,
110, 112)
The steering levers are used to steer, operate in
forward and reverse, and stop the unit. When held in
neutral, the brakes are engaged.
Steering Lever Latches (988100, 101, 102, 103,
104, 110, 112)
The steering lever latches hold the steering levers in
neutral and apply the brakes.
Control Levers (988114, 115, 118, 119, 313)
The control levers are used to steer, operate in forward
and reverse, and stop the unit. Push forward to move
forward. Shift into reverse and pull up on the lower
control levers to move in reverse. When held in neutral,
the brakes are engaged.
Ignition Switch (988104)
Operate the ignition switch with the
removable key. The switch has three
positions: Off (1), On (2) and Start (3). To
start the engine, turn the key to Start, then
release to On. To stop the engine, turn the
key to Off.
Ignition Switch (988100, 101, 102, 103, 110,
112, 114, 115, 118, 119, 313)
Operate the ignition switch with the
removable key. The switch uses two
positions: Off (1) and On (2). To start the
engine, turn the key to On (2) and pull the
recoil handle. To stop the engine, turn the
key to Off (1).
Throttle Lever
(988101, 102, 103, 104, 112, 115, 119)
The throttle lever changes the speed of the
engine. Move the throttle lever to Fast (1) to
increase engine speed. Move the lever to
Slow (2) to decrease engine speed.
Throttle/Choke Lever
(988100, 110, 114, 118, 313)
The Throttle/Choke lever changes the speed
of the engine and chokes the engine for cold
starts. Place the lever in Choke (1) to start a
cold engine. Move the lever to Fast (2) to
increase engine speed. Move the lever to
Slow (3) to decrease engine speed.
Choke Control
(988101, 102, 103, 104, 112, 115, 119)
Use the choke control to start a cold
engine. Pull the control out to choke the
engine. Push the control in when the
engine gets warm.
Shift Lever
The shift lever sets the direction and speed of the unit.
R = reverse
N = neutral
1 = the slowest forward speed
5 = the fastest forward speed.
PTO Clutch (988100, 101, 102, 103, 104, 110,
112)
Pull the PTO (power take off) switch On
(1) to engage the mower blades. Push
the PTO switch Off (2) to disengage the
mower blades.
WARNING:
AVOID INJURY. When the
engine is running and the shift lever is
engaged, releasing only one steering latch
causes the unit to circle around one drive
wheel.
ALWAYS hold both steering levers in the
neutral position when releasing the steering
lever latches.
ALWAYS release levers slowly.
WARNING:
AVOID INJURY. When the
engine is running and the shift lever is
engaged, moving only one lever causes the
unit to circle around one drive wheel.
ALWAYS move levers slowly.
1
3
2
OF1210
1
2
OF1212
OG1180
1
2
OG1061
1
2
3
OG1190
R
N
1
2
3
4
5
OG1040
OE0260
1
2