Filter
Top Products
GB - 14
• To move straight forward; slowly release both
steering levers to the full outward position.
• To stop unit in neutral, hold levers in the neutral
position.
• To lock unit in neutral, engage both steering
latches.
• To turn to the left, pull the left hand lever up.
• To turn to the right, pull the right hand lever up.
To move in reverse:
1. Place steering levers in neutral.
2. Engage steering lever latches.
3. Engage the operator presence control and move
shift lever to Reverse.
4. Hold steering levers in neutral and release
latches.
5. Release steering levers slowly.
To mow:
1. Lock steering levers in neutral.
2. Put the shift lever in neutral.
3. Move the throttle lever to the fast position.
4. Engage the operator presence control lever.
5. Move the PTO switch to On to engage mower.
IMPORTANT: NEVER engage the PTO if the mower is
plugged with grass or other material. This will damage
the PTO belt.
6. Move the shift lever to set a slow ground speed.
7. Hold steering levers in neutral and release
latches.
8. Release steering levers slowly.
When you know how to operate the unit, select a speed
appropriate to your mowing conditions.
To stop mowing:
1. Lock the steering levers in neutral.
2. Keep one hand on the operator presence control
and move the shift lever to the neutral position.
3. Move the throttle lever to 1/2 speed.
4. Turn off PTO switch.
988114, 115, 118, 119, 313
To shift unit:
1. Stop unit movement by bringing control levers to
neutral.
2. With control levers in neutral, use your knee or
hand to move the shift lever to the desired
position.
3. Push both control levers forward slowly to move
in selected direction.
To operate:
1. Start the engine (See Starting and Shut Off on
page 12).
2. Move the throttle lever to the Fast position.
3. Move shift lever to desired direction and speed.
4. Engage operator presence control.
WARNING: AVOID INJURY. When the
engine is running and the shift lever is
engaged, releasing only one steering latch
causes the unit to circle around one drive
wheel.
ALWAYS hold both steering levers in the
neutral position when releasing the steering
lever latches.
ALWAYS release levers slowly.
OG1410
OG1420
OG1430
OG1440
OG1450
WARNING: Uncontrolled reverse travel can
result in serious injury.
Do not put shift lever into the reverse
position unless you are prepared to operate
in reverse.
WARNING: AVOID INJURY. When the
engine is running and the shift lever is
engaged, using one steering control lever
causes the unit to circle around one drive
wheel.
ALWAYS hold both steering levers when
operating unit and move levers slowly.