Genie Z-60, Z-34 Utility Vehicle User Manual


 
Operator's ManualSixth Edition · Second Printing
Part No. 1000209 Z-60/34 37
Specifications
Height, working maximum 66 ft 20.1 m
Height, platform maximum 60 ft 18.3 m
Height, stowed maximum 8 ft 10 in 2.7 m
Horizontal reach maximum 34 ft 10.4 m
Width 8 ft 1 in 2.5 m
Length, stowed 26 ft 9 in 8.2 m
Maximum load capacity 500 lbs 227 kg
Maximum wind speed 28 mph 12.5 m/s
Wheelbase 8 ft 3 in 2.5 m
Turning radius (outside) 40 ft 1 in 12.2 m
Turning radius (inside) 19 ft 9 in 6.1 m
Turntable rotation (degrees) continuous
Turntable tailswing 0
Drive speed, stowed 4.0 mph 6.4 km/h
40 ft/6.8 sec12.2 m/6.8 sec
Drive speed, 0.6 mph 1.0 km/h
raised or extended 40 ft/40 sec 12.2 m/40 sec
Airborne noise emissions 105 dB
Maximum sound level at normal operating workstations
(A-weighted)
Controls 12V DC proportional
Platform dimensions, 6 foot 30 x 72 in
(width x length) 76 cm x 1.8 m
Platform dimensions, 8 foot 36 x 96 in
(width x length) 91 cm x 2.4 m
Platform leveling self-leveling
Platform rotation 180°
AC outlet in platform standard
Hydraulic pressure, maximum 2400 psi 166 bar
(boom functions)
System voltage 12V
Tires 15 x 19.5, 16-ply
Gradeability, stowed, 2WD / 4WD 27% / 45%
Ground clearance 16 in 40.1 cm
Fuel tank capacity 33 gallons 125 liters
Weight See Serial Label
(Machine weights vary with option configurations)
Maximum slope rating, stowed position, 2WD
Counterweight uphill 25% (14°)
Counterweight downhill 20% (11°)
Side slope 25% (14°)
Maximum slope rating, stowed position, 4WD
Counterweight uphill 40% (22°)
Counterweight downhill 30% (17°)
Side slope 25% (14°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Floor loading information
Tire load, maximum 9,931 lbs 4504 kg
Tire contact pressure 65 psi 4.57 kg/cm
2
448 kPa
Occupied pressure 254 psf 1240 kg/m
2
12.16 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations. It
should be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.