Filter
Top Products
Operator's ManualSixth Edition · Second Printing
Part No. 1000209 Z-60/34 13
PRE-OPERATION INSPECTION
Pre-operation Inspection
R Be sure that the operator’s, safety and
responsibilities manuals are complete, legible
and in the storage container located in the
platform.
R Be sure that all decals are legible and in place.
See Decals section.
R Check for engine oil leaks and proper oil level.
Add oil if needed. See Maintenance section.
R Check for hydraulic oil leaks and proper oil
level. Add oil if needed. See Maintenance
section.
R Check for engine coolant leaks and proper level
of coolant. Add coolant if needed. See
Maintenance section.
R Check for battery fluid leaks and proper fluid
level. Add distilled water if needed. See
Maintenance section.
R Check for proper tire pressure. Add air if
needed. See Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts and
unauthorized modifications:
R Electrical components, wiring and
electrical cables
R Hydraulic hoses, fittings, cylinders and
manifolds
R Fuel and hydraulic tanks
R Drive and turntable motors and drive hubs
R Boom wear pads
R Tires and wheels
R Engine and related components
R Limit switches and horn
R Alarms and beacons (if equipped)
R Nuts, bolts and other fasteners
R Platform entry mid-rail or gate
Check entire machine for:
R Crack in welds or structural components
R Dents or damage to machine
R Excessive rust, corrosion or oxidation
R Be sure that all structural and other critical
components are present and all associated
fasteners and pins are in place and properly
tightened.
R After you complete your inspection, be sure that
all compartment covers are in place and
latched.