Filter
Top Products
Operator's Manual Sixth Edition · Second Printing
20 Z-60/34 Part No. 1000209
FUNCTION TESTS
Test the Hydraulic Oil Return Filter
19 Move the engine idle select switch to high idle
(rabbit symbol).
20 Locate and check the hydraulic filter.
Result: The indicator should be in the green
area.
21 Move the engine idle select switch to foot switch
activated high idle (rabbit and foot switch
symbol).
Test the Horn
22 Push the horn button.
Result: The horn should sound.
Test the Foot Switch
23 Push in the platform red Emergency Stop
button to the off position.
24 Pull out the red Emergency Stop button to
the on position but do not start the engine.
25 Press down the foot switch and attempt to start
the engine by moving the start toggle switch to
either side.
Result: The engine should not start.
26 Do not press down the foot switch and restart
the engine.
Result: The engine should start.
27 Do not press down the foot switch. Test each
machine function.
Result: The machine functions should not
operate.
Test the Machine Functions
28 Press down the foot switch.
29 Activate each machine function control handle
or toggle switch.
Result: All boom/platform functions should
operate through a full cycle.
Machines equipped with Platform Level Control
Disable Function: The platform level toggle switch
will not operate when the primary boom is raised or
extended or the secondary boom is raised past the
drive speed limit switches.
Test the Steering
30 Press down the foot switch.
31 Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the blue triangle on the control panel OR slowly
move the control handle in the direction
indicated by the blue triangle.
Result: The steer wheels should turn in the
direction that the blue triangles point on the
drive chassis.
32 Press the thumb rocker switch on top of the
drive control handle in the direction indicated by
the yellow triangle on the control panel OR
slowly move the control handle in the direction
indicated by the yellow triangle.
Result: The steer wheels should turn in the
direction that the yellow triangles point on the
drive chassis.