Genie Z-60, Z-34 Utility Vehicle User Manual


 
Operator's Manual Sixth Edition · Second Printing
36 Z-60/34 Part No. 1000209
TRANSPORT AND LIFTING INSTRUCTIONS
Observe and Obey:
Only qualified riggers should rig and lift the
machine.
Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial plate for the
machine weight.
Lifting Instructions
Fully lower and retract the boom. Move the jib
perpendicular with the ground. Remove all loose
items on the machine.
Use the turntable rotation lock to secure the
turntable.
Determine the center of gravity of your machine
using the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are four lifting points
on the chassis.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
4 ft 2 in
1.27 m
Chassis
Lifting
Points (2)
Chassis
Lifting
Points (2)
3 ft 4 in
1.02 m