OneWASH™ Power Washer 1
1.1 — INTRODUCTION
Thank you for purchasing this power washer manufac-
tured by Generac Power Systems, Inc. This model is a
high performance, air-cooled, engine-driven power
washer that operates at 3100 psi.The units feature cus-
tom designed wheels, axial cam pump with stainless
steel pistons, automatic cool down system, quick connect
nozzles, high pressure hose, detergent siphoning hose
and chemical tank.
Common sense and strict compliance with the spe-
cial instructions are essential to preventing acci-
dents. The operator must read this manual and
thoroughly understand all of the instructions and warn-
ings before using the equipment. If any portion of the
manual is not understood, contact the nearest Authorized
Dealer for starting, operating and servicing procedures.
The owner is responsible for proper and safe use of the
equipment.
The power washer can operate safely, efficiently and reli-
ably only if it is properly located, operated and main-
tained. Before operating, servicing or storing:
• Study all warnings in this manual and on the product
carefully.
• Become familiar with this manual and the unit before
use.
• Refer to the Assembly section of the manual for
instructions on final assembly procedures. Follow the
instructions completely.
The manufacturer cannot anticipate every possible cir-
cumstance that might involve a hazard. The warnings in
this manual, and on tags and decals affixed to the unit
are, therefore, not all inclusive. If using a procedure, work
method or operating technique that the manufacturer
does not specifically recommend, ensure that it is safe for
others. Also make sure the procedure, work method or
operating technique utilized does not render the power
washer unsafe.
THE INFORMATION CONTAINED HEREIN WAS
BASED ON MACHINES IN PRODUCTION AT THE
TIME OF PUBLICATION. GENERAC RESERVES THE
RIGHT TO MODIFY THIS MANUAL AT ANY TIME.
Save these instructions for future reference. If you
loan this device to someone, always loan these
instructions and the Owner's Manual to the individ-
ual as well.
1.1.1 — Where to Find Us
You can contact Generac Customer Service by phone at
1-888-436-3722, or on the internet at www.generac.com.
Record the important information of the unit in the follow-
ing chart for future reference and/or service inquiries.
Model Number
Serial Number
Date Purchased
Section 1 Introduction