Filter
Top Products
52 - English
6. MENU FUNCTIONS
Backlight , R40Li
To indicate where the robotic lawnmower is at night in
the working area, it is possible to allow the display to
remain on when the robotic lawnmower is in operation.
1. Select Backlight , R40Li in the menu and press
OK.
2. Select one of the following options:
Auto: The display is lit for 1 minute after the latest
key press.
ON: The display is lit all the time when the robotic
lawnmower operates. The display is not lit when
the robotic lawnmower is stopped due for instance
to a timer setting or possible disruption.
Remote start, R40Li
One important function with the guide wire is the
capacity to steer the robotic lawnmower to remote
garden areas when required. This function is very
useful in gardens where, for instance, the front and
back are joined by a narrow passage where the
charging station cannot be installed.
With this function activated, (any option other than
Never is selected) the robotic lawnmower will follow
the guide wire from the charging station to the point
where the guide wire connects to the boundary wire.
It begins to mow when it reaches this point. How
often it must follow the guide wire from the charging
station is selected as a proportion of the total number
of times it leaves the charging station. At all other
times, the robotic lawnmower leaves the charging
station in the standard manner and starts to mow.
The following five options can be selected;
• Never (0%)
• Rarely (approx. 20%)
• Medium (approx. 50%)
• Often (approx. 80%)
• Always (100%)
Select the percentage that corresponds to the size of
the remote area relative to the total working area. If the
remote area is for instance less than half of the total
working area, then Rarely must be selected. If the
remote area is for instance half of the total working
area, Medium must be selected. Compare with the
examples in 7. Garden examples on page 54.
The default setting is Rarely.