Filter
Top Products
50 - English
6. MENU FUNCTIONS
Time lock
This function means that the robotic lawnmower
cannot be started after 30 days without first entering
the correct PIN code. When the 30 days has passed
the robotic lawnmower will continue to mow as normal,
but the Enter PIN code message appears when the
cover is opened. Enter your code again and press OK.
PIN request
This function means that the robotic lawnmower
requests a PIN code when the main switch is set to 1
and each time the cover is opened. The correct PIN
code must be entered to use the robotic lawnmower.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The
blockage time is extended for every new incorrect
attempt.
Alarm
This function means that an alarm sounds if the PIN
code is not entered within 10 seconds after the STOP
button has been pressed or the robotic lawnmower has
been lifted up for any reason. A ticking noise indicates
that the PIN code must be entered to prevent triggering
the alarm. The alarm can be turned off at any time by
entering the correct PIN code.
New loop signal
The loop signal is randomly selected to create a
unique link between the robotic lawnmower and the
charging station. In rare cases, there may be a need
to generate a new signal, for instance if two adjacent
installations have a very similar signal.
• Place the robotic lawnmower in the charging
station.
• Select New loop signal in the menu and
press OK.
Change PIN code
Security level
New loop signal