Filter
Top Products
April 1, 2005 16 Lit. No. 94430/94431
MAINTENANCE
Bearing and Set Screw Maintenance
Disconnect the electrical plug between the spreader and
the truck before performing any maintenance.
1. Tighten all set screws shown after every 60 hours of
use.
2. Grease the top and bottom drive shaft bearings as
shown. Due to the harsh environment of the bottom
bearing it will require more care than the top
bearing.
Auger
Set Screw
Spinner
Set Screw
Bottom Bearing
Set Screw
Top Bearing:
Grease after every
60 hours of use.
Use a good quality
multi-purpose grease.
Bottom Bearing:
Grease after every
8 hours of use.
Use a good quality
multi-purpose grease.
Motor Pulley
Set Screw
Shaft Pulley
Set Screw
Top Bearing
Set Screw