Filter
Top Products
15
2.9.5 Deck Drive: Electric clutch mounted on vertical engine shaft. Blades are driven by
one belt (w/self-tensioning idler) direct from the engine.
2.9.6 Deck: Full floating deck is attached to out-front support frame.
Maximum turf protection is provided anti-scalp rollers:
34” Decks: Qty 2 (optional)
44” Decks: Qty 3 (standard)
Deck design allows for bagging, mulching or side discharge.
2.9.7 Cutting Height Adjustment: a foot deck lift lever is used to adjust the cutting height
from 1” (2.5 cm) to 5” (12.7 cm.) in 1/4” (.64 cm.) increments.
The cutting height adjustment handle has a transport position and all adjustments can
be made while the operator remains seated.
2.9.8 Mulching Kit: Optional. Kit numbers: 34” MK343, 44” MK443
2.10 DIMENSIONS
2.10.1 Overall Width:
34” Deck 44” Deck
Without deck
34.5 in.
(87.6 cm)
40.0 in.
(101.6 cm)
Discharge chute up
35.0 in.
(89.0 cm)
47.4 in.
(120.4 cm)
Discharge chute
down
44.0 in.
(111.8 cm)
54.7 in.
(139.0 cm)
2.10.2 Overall Length:
34” Deck 44” Deck
70.0 in.
(177.8 cm)
70.0 in.
(177.8 cm)
2.10.3 Overall Height:
34” Deck 44” Deck
39.0in.
(99.1 cm)
39.0in
(99.1 cm)
2.10.4 Tread Width: (center to center of tires, widthwise)
34” deck 44” deck
Drive Wheels
26.5 in.
(67.3 cm)
35.0 in.
(88.9 cm)
Front Casters
29.0 in.
(73.7 cm)
29.0 in.
(73.7 cm)
2.10.5 Wheel Base: (center of caster tire to center of drive tire)
34” deck 44” deck
45.0 in.
(114.3 cm)
45.0 in.
(114.3 cm)
2.10.6 Curb Weight:
34” deck 44” deck
570 lbs.
(258.5 kg)
605 lbs.
(274.4 kg)
2.11 TORQUE REQUIREMENTS
Bolt Location Torque
Cutter Housing Spindle Nut (secured with threadlocker) 140-145 ft-lbs. (190-197 N-m)
Blade Mounting Bolt........................................................115-120 ft-lbs. (156-163 N-m)
Anti-Scalp Roller Nuts.............................................................40-45 ft-lbs. (54-61 N-m)
Engine Mounting Bolts ...........................................................25-30 ft-lbs. (34-41 N-m)
Wheel Lug Nuts ..................................................................90-95 ft-lbs. (122-129 N-m)
Clutch Retaining Bolt (secured with threadlocker)...................55-60 ft-lbs. (75-81 N-m)