Exmark Lazer ZXS Lawn Mower User Manual


 
10
WARNING
POTENTIAL HAZARD
Hydraulic fluid escaping under pressure
can penetrate skin and cause injury.
WHAT CAN HAPPEN
Fluid accidentally injected into the skin
must be surgically removed within a few
hours by a doctor familiar with this form of
injury or gangrene may result.
HOW TO AVOID THE HAZARD
Make sure all hydraulic fluid hoses and
lines are in good condition an all hydraulic
connections and fittings are tight before
applying pressure to hydraulic system.
Keep body and hands away from pinhole
leaks or nozzles that eject high pressure
hydraulic fluid.
Use cardboard or paper, not your hands,
to find hydraulic leaks.
Safely relieve all pressure in the hydraulic
system by placing the motion control
levers in neutral and shutting off the
engine before performing any work on the
hydraulic system.
1.9 COMMERCIAL USER SETUP
1.9.1 On the 34” deck, three of the four 5/16-18 x 3/4 hex capscrews that secure the belt
shields to the mower deck can be replaced with the knobs (Figure 2A).
On the 44” deck replace the four capscrews with the knobs (Figure 2B).
34” DECK 44” DECK
FIGURE 2A FIGURE 2B