Filter
Top Products
12
1.10 SAFETY SIGNS
1.10.1 Keep all safety signs legible. Remove all grease, dirt, and debris from safety signs
and instructional labels.
1.10.2 Safety signs must be replaced if they are missing or illegible.
1.10.3 When new components are installed, be sure that current safety signs are affixed to
the replaced components.
1.10.4 New safety signs may be obtained from your authorized Exmark equipment dealer or
distributor or from Exmark Mfg. Co. Inc.
1.10.5 Safety signs may be affixed by peeling off the backing to expose the adhesive surface.
Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.10.6 Familiarize yourself with the following safety signs and instruction labels. They are
critical to the safe operation of your Exmark commercial mower.
PART NO. 1-403005
LOCATION: Left and Right Corners
of Mower Deck
PART NO. 1-303508
LOCATION: Bottom Right
Corner of
Mower Deck
PART NO. 109-2465
LOCATION: Left of Center on Mower
Deck, Under Floor Pan
PART NO. 1-513746
LOCATION: On Rear
Guard
PART NO. 109-2862
LOCATION: RH Frame
Panel
PART NO. 109-2490
LOCATION: Center of Footrest
PART NO. 98-5954
LOCATION: Under Mower
Deck Belt
Shield(s)
PART NO. 109-2467
LOCATION: On RH and LH
Engine Base
PART NO. 103-1077
LOCATION: LH side of Mower
Deck
PART NO. 109-2463
LOCATION: Inside Height
Adjustment Bracket
PART NO. 109-2992
LOCATION: RH Frame
Panel(beside seat)
PART NO. 1-513747
LOCATION: On Frame Panel (beside seat)