Filter
Top Products
- 5 -
1.5.2 When making adjustments while the engine is running, such as carburetor and
motion control linkage adjustments, stand to one side and keep clear of
moving/rotating components, such as engine screen, drive belts and sheaves.
Do Not
wear loose fitting clothing or jewelry that could get tangled in
moving/rotating components.
1.5.3 Keep engine and engine area free from accumulation of grass, leaves,
excessive grease or oil and other debris which can accumulate in these areas.
These materials can become flammable and may result in a fire.
1.5.4 Store fuel in a container specifically designed for this purpose in a cool, dry
place.
1.5.5 Keep the mower and fuel container in locked storage to prevent children from
playing or tampering with them.
1.5.6 Gasoline powered equipment or fuel containers should not be stored in a
basement or any enclosed area, where open pilot lights or heat appliances are
present.
1.5.7 Maximum mowing results and safety can only be achieved if the mower is
properly maintained and operated correctly.
1.5.8. Check all bolts frequently to maintain proper tightness.
1.5.9. Keep all guards, shields and all safety devices in place and in safe working
condition.
1.5.10 Frequently check for worn or deteriorating components that could create a
hazard.
1.5.11 All replacement parts must be the same as or equivalent to the parts supplied
as original equipment.
WARNING
POTENTIAL HAZARD
♦ Hydraulic fluid escaping under pressure can penetrate
skin and cause injury.
WHAT CAN HAPPEN
♦ Fluid accidentally injected into the skin must be
surgically removed within a few hours by a doctor
familiar with this form of injury or gangrene may result.
HOW TO AVOID THE HAZARD
♦ Make sure all hydraulic fluid hoses and lines are in
good condition an all hydraulic connections and fittings
are tight before applying pressure to hydraulic system.
♦ Keep body and hands away from pinhole leaks or
nozzles that eject high pressure hydraulic fluid.
♦ Use cardboard or paper to find hydraulic leaks.
♦ Safely relieve all pressure in the hydraulic system
before performing any work on the hydraulic system.