Filter
Top Products
6
ULTRA VAC QDS DRIVE KIT
FRONT WEIGHTS (Included with Ultra Vac QDS)
Key Qty Description
13 1
Spacer,
Counterweight
(52”
decks)(See
Figure
2)
18 1 Pin, Chute Pivot
19 1 Pin, Hair
20 2 Knob, Belt Shield
21 1 Sheave, Blower Drive
22 1 Belt, Blower
23 1 Cover, Belt
24 1 5/16 – 18 X .62 Hex Head Screw
25 1 Plug
26 2 Asm, Weight with Decals
Key Qty Description
27 1 Plate, Weight Mounting
28 4 5/16-18 x 1 Hex Head Screw
6
4 5/16-18 x 1 ½ Hex Head Screw
29 4 Hairpin, Cotter
6
52” units with standard weight plate bolted to the
front of the floor pan only.
3.2 INSTALL DRIVE KIT
Install drive kit (PN 103-1314, 103-1315, or 103-1317 depending on deck size) per the
following instructions. See section 3.3 for instructions regarding installation of weight kit
103-5629.
NOTE: The original belt shield stud must be removed for belt clearance.
3.2.1 Discharge Chute Replacement:
a) Position mower on a flat surface.
b) Stop engine, remove key, and wait for all moving parts to stop.
c) Remove two (2) capscrews connecting the discharge chute to the deck.
Remove the discharge chute.
d) Re-Install the discharge chute using the chute pivot pin (Item 18) and hairpin
(Item 19) provided as shown in Figure 4.
FIGURE 3