Filter
Top Products
Design LED Par Zoom MH™
©Elation Professional 19 Design LED Par Zoom MH™
8. FIXTURE MENU
On-Board System Menu: The DESIGN LED PAR ZOOM MH™ comes with an easy to
navigate system menu. This next section will detail the functions of each command in the
system menu.
LED Control Panel: The control panel located on the top, front of the fixture allows you to
access the main menu and make all necessary adjustments to the Design LED Par Zoom
MH™. During normal operation, tapping the “MODE/ESC” key once will access the fixture’s
main menu. Once in the main menu you can navigate through the different functions and
access the sub-menus with the Up and Down buttons. Once you reach a field that requires
adjusting, tap the ENTER button to activate that field and use the UP and Down button to
adjust the field. Tapping the Enter button once more will confirm your setting. Once a setting
is saved the LED will briefly readout PASS to confirm a new setting has been made and
locked into memory. You may exit the main menu at any time without making any
adjustments by tapping the MODE/ESC button.
MODE/ESC Button - To access the main menu locate the MODE/ESC button on the front
of the unit. Press this button to activate the system menu. Tap the UP button until you reach
the function you wish to change. When you reach the function you wish to change tap the
ENTER button once to select that menu function. When a function is selected the menu will
begin to flash, use the UP or DOWN button to change the function. Once your changes are
made tap the ENTER button yet again to lock the change in the system menu. To exit
without making any changes tap the MODE/ESC button.
Default settings shaded.
0
ADDR
AXXX A001
Indicate the staring DMX address
A001 also is the setting for slave
1
TEST
T-01~T-13
Automatically test the function
RUN
MSTR/ALON
Runs fixture as “master” or “alone” for
auto
AUDI
MSTR/ALON
Runs fixture as “master” or “alone” for
audio
2
PLAY
AUTO
Clos/ Hold/Auto/Audi
Runs fixture for no DMX
ALL
Reset all motors and returns fixture to
home
3
RESE
SCAN
Reset only motors for pan/tilt
4
TIME
LIFE
0000~9999
Displays the total fixture running time