Filter
Top Products
Design LED Par Zoom MH™
©Elation Professional 14 Design LED Par Zoom MH™
Clamp Mounting
The Design LED Par Zoom MH™ provides a unique mounting bracket assembly that
integrates the hanging yoke as well as the safety cable rigging point in one unit (see the
illustration below). When mounting this fixture to truss be sure to secure an appropriately
rated clamp to the hanging yoke using a M10 screw fitted through the center hole of the
hanging yoke. As an added safety measure be sure to attached at least one properly rated
safety cable to the fixture using on of the safety cable rigging point integrated in the bracket
assembly
Securing the DESIGN LED PAR ZOOM MH™
Regardless of the rigging option you choose for your DESIGN LED PAR ZOOM MH™
always be sure to secure your fixture with a safety cable. The fixture provides a built-in
rigging point for a safety cable on the hanging bracket as illustrated above. Be sure to only
use the designated rigging point for the safety.