Filter
Top Products
7
CS-352
PACKING LIST
The ECHO product you purchased has been factory
pre-assembled for your convenience. Due to packag-
ing restrictions, guide bar and saw chain installation and
other assembly may be necessary.
After opening the carton, check for damage. Immediately
notify your retailer or ECHO dealer of damaged or miss-
ing parts. Use the packing list to check for missing parts.
Warranty registration card
ECHO Power Blend X™ 2-stroke oil sample
Instruction manual Safety manual
ECHO chain saw
Saw chain
Guide bar
Kick Guard®
X7503270900
X750015400
08/11
Chain Saw
Instruction Manual
MODELS : CS-352
WARNING DANGER
This chain saw is intended for professional or experienced chain saw operators. Read and understand
the instructions contained in this manual and the Safety Manual and follow the rules for safe operation.
Failure to do so could result in serious injury.
Emission Data
An Emission Control Label is located on the engine. (is
is an EXAMPLE ONLY, information on label varies by
engine FAMILY).
Emission Control (Exhaust & EvaporativE)
EPA 2010 and Later and/or C.A.R.B. TIER III
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
e 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emis-
sions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as
listed in the Maintenance Section of this manual.
e emission control system for the engine is EM (engine
modication) and, if the second to last character of the Engine
Family on the Emission Control Information label (sample
below) is “C”, “K”, or “T”, the emission control system is EM
and TWC (3-way catalyst). e fuel tank/fuel line emission
control system is EVAP (evaporative emissions). Evaporative
emissions for California models may only be applicable to fuel
tanks.
Assembly Tool (s)