Filter
Top Products
30
CS-352
SETTING THE SAW CHAIN
Important points for proper maintenance of saw
chain:
• Keep the cutters sharp at all times.
• Keep the left and the right cutters properly
aligned.
- Note that blunt or irregular cutters will result in
poor cutting performance, increased vibration
of chains and premature breakage of the saw
chain.
• Drive link serves to remove sawdust from the
groove of the guide bar.
Keep the lower edge of the drive link sharp
where indicated.
SETTING SAW CHAIN
• For setting saw chain, round le (4.0 mm dia.
5/32 in.) and at le are used.
• To keep correct position and correct angle,
use the le holder (Sure Sharp
®
).
30°
Push le as shown
Keep this angle
Hold the le horizontally
90°
Drivelink
Tie strap
Righthandcutter
Preset tie strap
Lefthandcutter
Guardlink
Top plate
Side plate
Depthguage
Sharpenloweredge
91P
91VG