Filter
Top Products
Dynasty Spas Operator’s Guide • www.dynastyspas.com
18
(An Overview)
Monthly - For Equipment Protection
CALCIUM BOOSTER (If Needed) - Calcium booster treats the water if low
calcium hardness is a problem in your area. It will help prevent equipment
corrosion and foaming by raising the spa's water hardness level to an
acceptable range of 120 ppm.
Filter Cleaning
Keep your filter free of grease, grime, and oil. Clean the filter with SPA
CARTRIDGE FILTER CLEAN. One 16 oz. bottle treats a 55 square foot filter.
See Filter Maintenance section for location and diagram.
As Needed
Surface Cleaning
Between refills and as needed, clean the surface using SPA MULTI-
PURPOSE CLEANER. For tough scale & stains, use STAIN & SCALE
REMOVER.
Surface Protection
To protect and seal the spa surface, use SPA FAST GLOSS every time you
drain and clean the spa.
Water Balance
Adjust the pH quickly and easily with pH STABILIZER. It will properly adjust
and hold the pH for up to 1 month. Note: Not recommended for calcium
hardness levels above 200 ppm. Use SPA UP to raise pH and SPA DOWN
to lower pH.
Sanitizing
Use 2 ounces of SODIUM BROMIDE to create a bromide reserve. When
using BROMINATING TABLETS in a floating basket, two to three tablets will
treat up to 500 gallons of water. For a chlorine system, use CHLORINATING
GRANULES (1/2 oz. per 500 gallons).
KEEPING YOUR SPA WATER CLEAN & FRESH