Dynasty Spas 2008 Hot Tub User Manual


 
Dynasty Spas Operator’s Guide • www.dynastyspas.com
12
Air Control
Each spa is equipped with air controls (venturies). The
purpose of these controls is to regulate the mixture of air
and water that flows through the jets. If an optional blower is
installed, air is also pushed through the air controls
(venturies) for maximum output. If your spa has a master
massage jet located in the foot well, the spa will be
equipped with an air control specifically for the master
massage jet. This third control operates the same as the
others. Colors/style may vary from drawing. An Air Control
is the smallest of the valve controls.
Mini Diverter Valve
This valve controls the water flow of neck jets, shoulder jets,
and waterfalls (if so equipped) located throughout the spa.
A simple clockwise turn of the handle will increase to the
maximum output allowed. Another turn in the opposite
direction will decrease / turn off the jet. Colors/style may
vary from drawing. A Mini Diverter Valve is the medium size
of the valve controls.
Water Diverter Valve
The Water Diverter Valve controls the output of the pump(s)
water flow to either side of the spa, or it will provide even
water flow to all jets if left in the half way position. The
purpose of this valve is to increase or decrease the output
of one side or another for maximum or minimum water flow
in case of one or two person usage.This valve is also used
to turn the master massage jet on and off, if so equipped.
Colors/style may vary from drawing. A Water Diverter Valve
is the largest of the valve controls.
Although all three controls look similar in appearance, they
are easily discernable by size. The Air Control is the
smallest, the Mini Diverter Valve is medium in size, and the
Water Diverter Valve is the largest .
AIR CONTROLS & DIVERTER VALVES
A Mini Diverter Valve, an Air Control, and a Water Diverter Valve.
Locations will vary on each spa model.