Filter
Top Products
- 22 -
Maintaining Your Spa Cover
Proper Maintenance For Your Dynasty Spa Cover
1) Use a soft broom to remove accumulation after every snowfall or
ice storm.
2) Splash cool tap water on the hardware to free them if they become
frozen shut. WD-40™ will keep the lock free, but apply carefully
because it can damage the cabinet finish.
3) We recommend a good treatment with Vinyl Conditioner before the
first snow or ice. If possible, treat during the winter too.
4) Monitor your water chemistry. Even it the spa is not used regularly,
improper water chemistry can cause a mildew build-up on the
cover. Clean, PH controlled water will prolong the life of the cover.
5) If mildew is found, remove foam cores from the vinyl encasement.
Mix water, a teaspoon of mild dish washing soap and a cup of
bleach. With a soft bristle brush, scrub the inside and outside of
the vinyl encasement thoroughly. Then take a washcloth and wipe
down each foam core, rinse thoroughly. Place the encasement in
the sun and foam cores in the shade to dry. Once everything is
thoroughly dry, spray the cores and encasement with a mildew
inhibitor (like Pine Sol). Allow to dry completely, then reassemble.
The key here, of course, is to maintain proper water chemistry to
avoid mildew.
6) We suggest rotating the cover every six months to maintain even
wear. Unzip the cover, remove the foam cores, turn over and
reassemble.
Ask Your Dealer About Using A Cover Caddy
PROTECT YOUR COVER!