Filter
Top Products
- 12 -
Air Controls & Diverter Valve Controls
Air Control
Each spa is equipped with air controls (venturies). The
purpose of these controls is to regulate the mixture of air
and water that flows through the jets. If an optional blower
is installed, air is also pushed through the air controls
(venturies) for maximum output. If your spa has a master
massage jet located in the foot well, the spa will be
equipped with an air control specifically for the master massage jet. This third
control operates the same as the others. Colors/style may vary from photo. An
Air Control is the smallest of the valve controls.
Mini Diverter Valve
This valve controls the water flow of neck jets, shoulder
jets, and waterfalls (if so equipped) located throughout the
spa. A simple clockwise turn of the handle will increase to
the maximum output allowed. Another turn in the opposite
direction will decrease / turn off the jet. Colors/style may
vary from photo. A Mini Diverter Valve is the medium size
of the valve controls.
Water Diverter Valve
The Water Diverter Valve controls the output of the
pump(s) water flow to either side of the spa, or it will
provide even water flow to all jets if left in the half way
position. The purpose of this valve is to increase or
decrease the output of one side or another for
maximum or minimum water flow in case of one or two
person usage. This valve is also used to turn the master
massage jet on and off, if so equipped. Colors/style may vary from photo. A
Water Diverter Valve is the largest of the valve controls.
Although all three controls look similar in appearance, they are easily
discernable by size. The Air Control is the smallest, the Mini Diverter
Valve is medium in size, and the Water Diverter Valve is the largest .
Pictured left to right are:
A
Mini Diverter V
alve, an
Air Control, and
a Water Diverter Valve