Filter
Top Products
7
ENGLISH (Original instructions)
Explanation of general view
SPECIFICATIONS
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
END008-1
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
................. Take particular care and attention.
................ Read instruction manual.
................ Danger; be aware of thrown objects.
................ The distance between the tool and
bystanders must be at least 15 m.
.......... Keep bystanders away.
....... Keep distance at least 15 m.
............... Avoid kickback.
................ Wear a helmet, goggles and ear
protection.
................. Wear protective gloves.
................ Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
................ Do not expose to moisture.
................. Top permissible tool speed.
........ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
Intended use
ENE074-1
The equipment is intended for cutting grass, weeds,
bushes and undergrowth.
SAFETY INSTRUCTIONS GEB068-1
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
1. Red part
2. Slide button
3. Battery cartridge
4. Lock-off button
5. Switch trigger
6. Reversing switch
7. Speed change switch lever
8. Indication lamp
9. Most effective cutting area
10. Knob
11. Handle clamp
12. Compression spring
13. Handle holder
14. Cutter blade
15. Guard
16. Nylon cutting head
17. Guard extension
18. Two bolts
19. Protector cover
20. Hex wrench
21. Receive washer
22. Clamp washer
23. Cup
24. Hex nut
25. Threaded spindle
26. Lever
27. Buckle
28. Gear case
29. Grease hole
30. Cover
31. Latches
32. Press
33. Spool
34. For left hand rotation
35. Notches
36. Eyelets
37. Protrusion (Not shown)
38. Slot of the eyelet
Model AT-3623 AT-3630
Type of handle Bike handle Loop handle
No load speed
High 0 - 7,300 min
-1
0 - 6,600 min
-1
Low 0 - 5,300 min
-1
0 - 4,900 min
-1
Overall length 1,880 mm 1,850 mm
Cutting blade diameter 230 mm -
Cutting diameter with nylon cutting head - 300 mm
Net weight 7.1 kg 5.9 kg
Rated voltage D.C. 36 V
Cd
Ni-MH
Li-ion