Filter
Top Products
Technical manual
Page 17 of 72
ST0133 – A 02/09
SOLAR
Although only the vertical collector orientation is shown, the same principles can be
applied to the horizontal collector installation. The same applies for the positioning of
the flow and return, it can be changed from left to right hand side as long as the sensor
(indicated by dot) is moved accordingly.
Note: Up to 5 collectors can also be connected single sided with the orientation of the
individual collectors as shown in Figure 14 and the sensor placed in the sensor
pocket on the collector flow.
4.1.3 Roof fixing kits
The Dimplex solar collectors SOLC220 can be installed in most situations on or near a
building. An overall view of the installation options is shown in Figure 15.
Figure 15 – Dimplex Solar collector installation options
Dimplex offers a wide range of roof fixing kits for the installation of the SOLC220 solar
collector. The available roof fixing kits are summarised in Figure 16.
Figure 16 – Dimplex solar roof fixing kits overall view
Flashing kits are available as accessory for the integrated roof kits to cover the sides, bottom
and the gap between the collectors.
A
B
C
E
H
G
F
D